Buying Guide

New EU tyre labelling: what does it mean for me?

Michelin 08 Mar 2011

Tyre labelling.

Tyre labelling for passenger cars and light trucks will take effect from 1 November 2012 under European Regulation (EC) No. 1222/2009.

This new regulation will bring a major advance in consumer information on tyre safety (wet braking) and the tyre’s impact on the environment (rolling resistance and external noise).  

The graphics on the label may be familiar as they are already used for household appliances and more recently for new cars, but what are the benefits for consumers?

Compare fuel economy

Image: Fuel Economy Label
Use this diagram to see how a tyre performs on fuel consumption.
Fuel-efficiency is graded from A (most efficient) to G (least efficient).

Save up to £110 or 80 litres of fuel over the life of the tyres. That’s for a car fitted with four A-rated tyres driving at 50mph – it uses 7.5%1 less fuel than with G-rated tyres.
Results can vary with type of car or climatic conditions but the performance gaps are proven.

Compare braking on wet roads

Image: Wet braking distances

This chart grades a tyre on how well it brakes in wet conditions. Performance scales from A (the safest, stopping in the shortest distances) down to G (least safe, with longest braking distances).

Stop up to 4 car lengths shorter. For a car fitted with four A-rated tyres driving at 50 mph, stopping distance can be up to 18 metres or 30%1 shorter than with G-rated tyres.


Compare external noise level

This diagram shows you a tyre’s noise level in decibels (dB). The 3-wave pictogram tells you
Image: Noise Level Label
how it rates in relation to future European mandatory limits. Tyre noise heard outside the car doesn’t necessarily relate to what you hear inside the car.

3 black waves = Noisier tyre. Level greater than the future limit but complies with today’s noise regulation
2 black waves = Average tyre. Noise level equal to or below future limit by up to 3 dB (A)
1 black wave = Low noise tyre. Noise level 3 dB (A) or more below future noise limit

3dB doesn’t sound much but it is actually double the noise level!

What else matters when choosing tyres?

Labelling is a good start, but 3 other performance factors are just as important for you:

Tyre longevity: a longer-lasting tyre can cost you less in the long run. The right tyre could give you more than a year of extra driving compared to another tyre.

Road handling performance: 25% of accidents2 are on bends.

Dry braking performance: 70% of accidents2 occur on dry roads.

Guess who makes tyres with all the performance that counts…

For over 120 years, our engineers have pioneered and perfected tyres that deliver on these important performance factors, as well as the 3 factors listed on the new labels. With Michelin, you can enjoy an excellent balance of performance– without compromise.

Want better fuel economy and safety from your tyres?

You have a role to play…

The tyres themselves are part of the story, but you as a driver can make a difference.

Eco-driving: go easy on the accelerator, and enjoy considerable fuel savings over time.

Right tyre pressure: check regularly to ensure minimal energy loss due to excessive rolling resistance, and optimum grip on wet roads.

Keep your distance: a safe driving distance behind the car in front reduces your risk of an accident.

1Performance measured in accordance with the testing methods set by Regulation CE 1222/2009. European Commission’s Impact Assessment SEC (2008) 2860.

2Verkehrsunfallforschung (VUFO) and Technical University of Dresden: 10,000 accidents analysed over 10 years.


Get a recommendation by entering your Car details or tyre size and defining your driving needs.

Your recently viewed articles

There are no recently viewed articles

  • car
  • 4x4 / suv
  • van / motorhome